HT-300ZR Natural Ventilation Aging Test Chamber
This aging chamber is suitable for heat resistance testing of polymer materials (plastics, plastics) and electrical insulation materials such as wire and cable sheaths, heat shrink sleeves, rubber test pieces or PVC materials and other insulating components. It can also be used for high-temperature precision constant temperature. The drying oven is used for drying, baking, heat treatment, etc. of items (but it is not suitable for drying and testing of flammable, explosive and volatile substances that become flammable and explosive). Such as making tensile, pressure, impact and other test samples to compare the tensile strength and elongation of the test piece before aging and after aging. It is one of the indispensable equipment for tensile, pressure and impact testing; it can also be used for thermal extension, high temperature pressure, heating deformation, ball pressure and other tests.
Applicable standards: GB, VDE, JIS and other test requirements.
Temperature control and insulation system:
1. Use imported intelligent P.I.D temperature controller (with automatic calculation function) and high-precision PT100 thermocouple sensor. It can ensure that the temperature fluctuation is within 5% (calculated based on the maximum temperature);
2. Heater: Solenoid heater, power: 2.5kw; with two-stage heating selection mode, normal temperature to 300°C in less than 60 minutes.
3. Temperature range room temperature: +20℃～200℃
4. It has ultra-high temperature protection function. It can automatically cut off and stop heating after over-temperature, which can effectively protect the safety of the equipment.
Ventilation system:
1. Built-in adjustable ventilation outlet: By changing the size of the air outlet, the amount of ventilation can be appropriately changed, and the adjustment is very convenient.
2. Air exchange volume adjustment range: 8~20 times/hour.
Timing system:Timer: 999.9 hours can be set. (Optional power-off hold and automatic power-on functions must be specified when ordering)
Instrument composition:
1. Studio: 450X450X500 mm;
2. Double-layer stainless steel partition,
3. Glass observation window and internal lighting can facilitate observation of changes in test samples.
4. Overall dimensions: approximately 85X55X100 (cm) (width x height x depth), with movable casters.
5. Stainless steel inner tank and cold-rolled steel outer shell electrostatic spraying.
6. Weight: 100kg
7. Power supply: 220V/50Hz
HT-2951 Hot Extension Test Device
Test standards: Comply with GB/T2951.21.9-2008 standard and other provisions requiring the use of this device GB5013-2008. This device must be used with
Used in conjunction with HT-300ZR natural ventilation aging test chamber.
The main parameters:
1. Sample station: three groups
2. Single set of weights: 1, 2, 5, 10, 20, 50g (2 pieces each) 100g (1 piece)
3. 150mm stainless steel ruler
