HT-1040 Dumbbell Type Sample Preparation Machine
The machine shall be suitable for the preparation of dumbbell-type tensile specimens and Vicat thermal deformation specimens of various non-metallic pipes or plates. It adopts the principle of profiling and combines the principle of mechanical transmission to transform the rotary motion of the thread into a linear motion. It has the characteristics of simple operation, fast and convenient, and the standard and dimensional stability of the sample are obtained. The relative position of the sample and the tool can be adjusted according to the actual situation. The shape of the sample must be controlled by the corresponding shape of the template. The working process is not affected by the movement of the operator. It can be reused many times without repeated tooling. The sample spline reduces the wear time of the working time and improves the versatility of the operation, improves the work efficiency, reduces the processing cost, and installs a dust suction device on the work surface, the tool is durable, and the sample edge is smoothed. No burrs.
Standards compliant:
GB/T 8804.2-2003 "Temperature pipes for thermoplastics - Determination of tensile properties - Part 2:rigid polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) and high-impact polyvinyl chloride (PVC-H1) machined specimens (type 1) and blanking specimens (type 2) specified in the pipe;
GB/T 8804.3-2003 "Temperature tubing - Determination of tensile properties - Part 3: Polyolefin pipes" - Dumbbell type specimens (type 1, type 2);
GB/T 1040.2-2006 "Determination of tensile properties of plastics - Part 2: Test conditions for molded and extruded plastics"
GB/T 1040.3-2006 "Determination of tensile properties of plastics - Part 3: Test conditions for films and sheets" - Dumbbell type specimens (types 5 and 1B).
Prepare sample specifications:
GB/T1040—2006 “Type I and II dumbbell specimens specified in the “Test method for tensile properties of plastics”;
GB8802 hard polyvinyl chloride (PVC-U) pipe and fittings Vika softening temperature determination method" and GB1634-79 "thermoplastic softening point (Vicat) test method" specified in the thickness of > 6mm Vicat sample;
Long strip samples with a total length of ≤250mm, a width of 16-50mm and a thickness of ≤20mm;
Other shapes of samples required by the user (special order required).
Technical Parameters
Milling cutter diameter: 27mm;
Milling cutter speed: 2900 rev / min;
Work surface size: 400mm × 400mm;
Sample thickness: 1 ~ 20mm;
Weight: 85Kg;
Power supply voltage: AC 380V ± 10%, 50Hz;
Power: 370W.
Accessories:
One set of host
One pcs of milling cutter
One pcs of mold
