| Image |
Description |
 |
KS55 - Extending Rod, extending rod increases the depth for pickup to enter the part. extending 50mm long. |
|
KS90 - Right Angle Rod, change the position of the sensor, mostly use for measure surface of particular groove. |
|
KS100 - Small Hole Sensor, measures flat surface, shaft ; when measure inner hole surface, the diameter of inner hole are required＞5mm, depth＞22mm. |
|
KS110 - Curved Surface Sensor, to measure smooth cylindrical surface which radius is larger than 3mm, for the large radius smooth spherical surface and other surface also can obtain good approximation, need to work with platform KA520 or KA620. |
|
KS120 - pinhole Sensor, to measure the inner surfaces of holes with radius more than 2mm, better to work with platform KA520 or KA620. |
|
KS130 - Groove sensor, measure flat surface, groove surface with width ≥2mm, depth ≤3mm, and on steps with height ≤3mm, also to equipped with Measuring fixture, can measure cylindrical surface. |
|
KS131 - Deep Groove Sensor, measure groove with width wider than 3mm and depth deeper than 10mm, or the surface roughness of step with height less than 10mm, also can used to measure the planar, cylindrical used with platform,better to work with platform KA520 or KA620. |
|
KA520 -Metal Substrate Working platform, adjustable height 200mm.
With flexible and stable operation and wider application range. Roughness of complex shapes can also be measured. Measurement stand enable the adjustment of the position of stylus to be more precise and measurement to be more stable. If Ra value of measured surface is relatively low, Using measurement platform is recommended.
|
|
KA620 -Marble Substrate Working Platform, adjustable height 300mm.
With flexible and stable operation and wider application range. Roughness of complex shapes can also be measured. Measurement stand enable the adjustment of the position of stylus to be more precise and measurement to be more stable. If Ra value of measured surface is relatively low, Using measurement platform is recommended.
|
|
Height Gauge Adaptor, The best Measuring Fixture for split type surface roughness tester, easy to use. |
|
Standard Roughness Calibration Block Multi-engraved lines (Square Wave)
Made by optical glass, with high hardness, high accuracy standard roughness value, anti-scratch, has longer life than metal roughness block.
Meet standard GB/T19067.1-2003 and ISO5436-1:2000
Approximation: Ra=0.1um, 0.2um, 0.4um, 0.8um, 1.6um, 3.2um, 6.4um
Customized Value and Sine Wave available, welcome to inquire.
|
|
Standard Roughness Calibration Block Single engraved lines
Made by optical glass, with high hardness, high accuracy standard roughness value, anti-scratch, has longer life than metal roughness block.
Meet standard GB/T19067.1-2003 and ISO5436-1:2000
Approximation: Ra=0.1um, 0.2um, 0.4um, 0.8um, 1.6um, 3.2um, 6.4um)
Customized Value available, welcome to inquire.
|
|
Roughness Comparator (30 pcs/set)
This set contains standards of the six most important machining methods in the prevalent "AA" values. These surface roughness is used to compare and determine the degree of the surface finish by comparision method and eye estimation or magnifying glass.The surface rough contast blocks is made of 45 super carbor steel except the GCr15 which is using to plat lapping the sample block. All 30 speciments are calibrated in u''AA (Arithmetical Average) and in the metric equivalents um Ra.
|
|
Charge and Cable for Surface Roughness Tester
Charger: US and EU standard optional
Cable: USB interface
|
|
Mini thermal printer
External printer, connect by USB interface, suitable for Kairda models.
|
|
Thermal printing paper
Suitable for mini thermal printer and Kaidas’s tester with built-in printer
Packing: 10pcs/bag
|
